Agilent 6410 manual

Multimode Source for Triple Quad LC/MS User Guide. 1 Basic Operation and Maintenance. To clean the multimode source weekly. 6 Remove the spray shield. Use abrasive paper to gently clean the end of the capillary cap. 7 Dampen a clean cloth and wipe the end of the capillary cap. 8 Reinstall the spray shield. Agilent A Triple Quad LC/MS Site Preparation Specification (Preliminary rev. ) Preliminary—the following information is believed to be correct but may change prior to shipment. Purpose of Procedure To ensure that the installation site is properly evaluated and prepared with the appropriate utilities, consumables. The LC/MS achieves sensitivity and resolution specifications after autotune without manual user intervention. The GB can also be paired with Agilent's 12Series LC modules, to deliver sensitive, reproducible analyses of target compounds in complex matrices.

Agilent a LC/MS/MS System. The Triple Quadrupole LC/MS achieves sensitivity and resolution specifications after autotune without manual user intervention. Signal-to-noise ratio , and repeatability ESI source, three concurrent MRM where noise = 5x RMS acquisitions, quantifying on the transition m/z to 1Make sure acetonitrile and water are two of the solvents installed in your liquid chromatograph. 2Set the liquid chromatograph to pump a mixture of 90% acetonitrile and 10% water at 2 ml/minute. 3Pump this mixture through the nebulizer for 3 minutes. NOTEThis procedure applies to both electrospray and APCI nebulizer. The Agilent B with HPLC System is the proven choice for your quantitative applications in pharmaceutical ADME/DMPK studies, biomarker validation, clinical research, food safety, forensics, toxicology, and environmental analyses. Meet your quantitative needs with triple quadrupole performance which gives superior sensitivity, renowned performance reliability, and easy upgradeability.

The Agilent 64Triple Quad LC/MS are shipped by default with the Agilent Jet Stream Technology that utilizes a super-heated sheath gas to collimate the nebulizer spray which dramatically increases the number of ions that enter the mass spectrometer. You can set up an Agilent Triple Quad LC/MS with the Agilent , , or. Agilent Triple Quad LC/MS System Maintenance Guide Agilent Technologies 1 Maintenance Electrospray Ion Source 8 ESI with Agilent Jet Stream Technology 22 APCI Source 37 Multimode Source, APPI Source and HPLC-Chip/MS Interface 53 Ion Transfer Capillary 66 Calibrant Delivery System and Divert Valve 76 Analyzer and Ion Optics Assembly Agilent A Triple Quad LC/MS Site Preparation Specification (Preliminary rev. ) Preliminary—the following information is believed to be correct but may change prior to shipment. Purpose of Procedure To ensure that the installation site is properly evaluated and prepared with the appropriate utilities, consumables.